Articles

• Effect study of an amount of active alumina addition on the properties of alumina refractories with a complex additive of chromium oxide and zirconium dioxide

  I. G. Shulik, T. G. Galchenko, E. B. Protsak, L. V. Belik

  3-11

  DOI: https://doi.org/10.35857/2663-3566.120.01
• Researches on development of alumina-chromia-zirconium silicate refractories containing 60 % Cr2O3

  P. O. Kushchenko, V. V. Primachenko, I. G. Shulyk, Yu. Ye. Mishnyova, K. I. Kushchenko, Yu. O. Krakhmal, T.G. Tishina

  12-28

  DOI: https://doi.org/10.35857/2663-3566.120.02
• Effect investigation of a new plasticizing additive on the refractories properties from fused zirconia stabilized with yttrium oxide for single crystal growing units

  I. G. Shulik, T. G. Galchenko, E. B. Protsak, L. V. Belik

  29-38

  DOI: https://doi.org/10.35857/2663-3566.120.03
• Influence research of an α–form alumina type on the properties of samples from vibrocasting mullite corundum granular masses

  V. V. Martynenko, P. A. Kushchenko, I. G. Shulyk, K. I. Kushchenko, Yu. O. Krakhmal, L. P. Tkachenko

  39-51

  DOI: https://doi.org/10.35857/2663-3566.120.04
• Effect of a calcined alumina additive amount on the properties of zirconia ramming mix on а phosphate bond

  V. V. Martynenko, P. O. Kushchenko, V. V. Primachenko, I. G. Shulik, E. B. Protsak, V. V. Varganov, T. G. Tishina

  52-65

  DOI: https://doi.org/10.35857/2663-3566.120.05
• Influence of an addition amount of a new type of alumina on the properties of ramming mullite-corundum mixes and samples from them

  V. V. Primachenko, I. G. Shulik, I. V. Khonchik, T. G. Tishina

  66-82

  DOI: https://doi.org/10.35857/2663-3566.120.06
• Influence of a new dispersant additive amount on the structural and rheological properties of chamotte concrete and samples from it

  P. O. Kushchenko, V. V. Primachenko, I. G. Shulik, L. K. Savina

  83-90

  DOI: https://doi.org/10.35857/2663-3566.120.07
• High alumina refractory concretes bonded with calcium aluminate phosphate binder

  A. O. Nagorniy

  91-97

  DOI: https://doi.org/10.35857/2663-3566.120.08
• Deflocculants for refractory castables (review)

  S. V. Chaplianko, V. V. Nikichanov

  98-114

  DOI: https://doi.org/10.35857/2663-3566.120.09
• Thermodynamic studies in the MgO – FeO – Al2O3 system

  O. M. Borysenko, S. M. Logvinkov, G. M. Shabanova, A. M. Korohodska, I. A. Ostapenko, A. A. Ivashura

  115-119

  DOI: https://doi.org/10.35857/2663-3566.120.10
• Calculation and evaluation of temperatures and eutectic compositions of multicomponent sections of the CaO—Al2O3—Fe2O3—Cr2O3 system

  A. N. Korohodska, G. N. Shabanova, O. M. Tychyna, N. B. Deviatova

  120-125

  DOI: https://doi.org/10.35857/2663-3566.120.11
• Properties dependence of the lightweight alumina products obtained by a semi-dry pressing method on the alumina type

  V. V. Martynenko, Yu. A. Krakhmal, K. I. Kushchenko, T. G. Tishina

  126-133

  DOI: https://doi.org/10.35857/2663-3566.120.12
• Influence research of temperature heat treatment on the microstructure of alumina ceramics

  V. V. Martynenko, Р. O. Kushchenko, K. I. Kushchenko, Yu. O. Krakhmal, E. L. Karjakina, Yu. Ye. Mishnyova

  134-143

  DOI: https://doi.org/10.35857/2663-3566.120.13
• Effect investigation of a thinning additive on the physical and mechanical properties of celsian ceramics obtained by slip casting

  G. V. Lisachuk, Ya. М. Pitak, R. V. Krivobok, A. V. Zakharov, V. V. Voloshchuk, P. P. Vabishchevich, A. S. Ryabynyna

  144-150

  DOI: https://doi.org/10.35857/2663-3566.120.14
• Technology of slip casting of celsian-slavsonite ceramics

  G. V. Lisachuk, Ya. М. Pitak, R. V. Krivobok, E. V. Chefranov, V. V. Voloshchuk, М. S. Maystat, L. S. Limarenko

  151-159

  DOI: https://doi.org/10.35857/2663-3566.120.15
• Investigation of the sintering kinetic and development of ceramic masses for obtaining large-format porcelain stoneware in the conditions of high-speed firing

  O. Yu. Fedorenko, M. I. Ryshchenko, S. V. Kartyshev, L. O. Yashchenko, O. Ya. Pitak

  160-174

  DOI: https://doi.org/10.35857/2663-3566.120.16
• Alumina silicate glass-ceramic materials for electrical purposes

  O. V. Savvova, G. K. Voronov, S. A. Ryabinin, E. Yu. Fedorenko, V. D. Timofeev

  174-185

  DOI: https://doi.org/10.35857/2663-3566.120.17
• Sol - gel method for producing of glass binding in the Li2O - Al2O3 - SiO2 system for ceramic materials

  E. S. Khomenko, E. V. Karasik

  186-195

  DOI: https://doi.org/10.35857/2663-3566.120.18
• Current state and prospects of stone mining and stone processing waste use in silicate industries (review)

  L. L. Bragina, S. O. Ryabinin, O. Yu. Fedorenko, O. P. Degurko, S. O. Melnik

  196-210

  DOI: https://doi.org/10.35857/2663-3566.120.19
• Development of the standards, technical specifications and changes to the TSs for refractories by JSC "The Ukrainian research institute of refractories named after A. S. Berezhnoy" in 2019

  V. V. Martynenko, P. O. Kuschenko, L. V. Belyaeva, I. Yu. Kostyrko, T. F. Pahomova

  211-218

  DOI: https://doi.org/10.35857/2663-3566.120.20
• Control of the work quality of chemical and analytical departments of the refractory industry enterprises of Ukraine in 2019

  E. V. Birukova, V. V. Varganov, N. N. Konchinko

  219-225

  DOI: https://doi.org/10.35857/2663-3566.120.21